Another crucial factor for tone and playability is the material that the string is made of. Electric guitar strings are typically steel, nickel, and chromium alloys because of their magnetic properties. Acoustic guitar strings are made of more acoustically resonant alloys like bronze and brass. Nylon strings are in a class of their own, compatible with guitars built specifically for them.
Also, never put steel strings on a nylon string guitar. In addition to alloys and string construction, experiment with diameter or gauge. Larger gauge strings have more vibrating mass, and therefore produce a loud, thick tone.
However, they require more tension to be brought up to pitch, making them more difficult to press down on the fingerboard. Experiment with gauge until you find a good balance between tone and playability. No one string is the best for every circumstance. Keep in mind that, as you change string gauges and materials, you might need to slightly alter the set up on your guitar due to differing string tension.
Acoustic guitars typically use bronze alloys, which produce a bright, crisp tone. I looked this up to get some back up to my idea because I want to play more difficult and complicated songs, but honestly if you've played long enough and know enough about your instrument and your personal preference and are willing to sacrifice some volume and natural drive for finger ease then by all means there is nothing wrong with it.
I've used Ernie Ball Slinkys on an acoustic several times over the years. I had an ovation celeb a few years back and I wanted to see if using them would make it more comfortable on my fingers.
I put a set on it and let her rip. It played great, it sounded good amplified. It did change the sound a bit. Playing unplugged there was not much volume. If you're new to the guitar world and want to ease the pain a little until you get your fingers toughened up go for it!
But this doesn't really say much, does it. The point is the gauge, not what it's tuned to. So "D electric" vs. Is it not the case that for un-wound high stings that acoustic and electric stings of the same gauge are actually the same.
It's just that when you get into the wound strings that there's a difference? It's the windings that make the difference. Bending properties are not going to be affected as much on wound stings by the winding as by the core are they? The windings basically just "ride" on the core? Get out the chart that D'Addario makes that shows the tension for different frequencies tuned on strings vs.
Can't I pull together whatever combination I want as long as I keep a pretty balanced tension? That is, given that there will be some differences in timbre of different windings.
Also, there may be changes you can make in timbre on low stings by different winding metals but there's not really a lot that can be done about such on high stings. The low string timbre affected by such due to over-tones, but once we get up to the high strings, the over-tones are more out of the spectrum of hearing and we're mainly just dealing with the fundamental and first couple over-tones.
I'm keeping it to the arena of acoustic guitars since we don't want to get into Magnetic Effects on PUPs on Electrics. My original issue that brought me here was the difference of different sting gauge and winding on the sound of various Acoustic designs -- Jumbo vs.
Dreadnought vs. OO, etc. If you want a great acoustic tone from an acoustic guitar you're just not gonna get it with electric strings, particularly light-gauge electrics. The overall sound is more tinny, the G string has a particularly tinnier quality due to being plain rather than wound, and the bass response of the entire instrument goes way down due to the significantly thinner bass strings.
If you want the punch that your guitar was designed to deliver, use the strings it was designed for. Because of the nature of the sound production in acoustic guitar. Of course you can put any string on acoustic guitar and still a sound would be produced. But to hear the original, natural timbre of the guitar, you have to use the original, natural strings. What I like about electric strings on acoustic guitar is that I can bend strings like playing on an electric guitar, you can't really do that with acoustic strings or get the same effect, anyway.
I only found out when I reordered. They sound good on a solid tonewood guitar but might be a bit trebbly on a laminate. I'm sticking with them. It is sacrilege to put electric strings on an acoustic. You don't get the same sound at all. You lose the unmistakable acoustic guitar sound. You lose the bassyness, warmth and texture of the acoustic guitar and get a tinny empty hollow sound in its place.
My advice I have just recently thrown a set of electric strings on an acoustic. I have noticed all the above differences as been told by others. I have had issues mainly only in bending, whilst its much easier I have found my typical bend style does not work the Key gets lost a bit.
It is an adjustment that I as a player need to master. Personally I was happier with my sound and playability before the change over but I enjoy playing it alot more now. I suppose only time will tell if they will stay or go. Considering that back in the day old blues players would throw on a length of chicken wire to replace a string and would play it until it busted, I say put those electrics on your acoustic.
Just keep playing and have fun, if you don't like it try a different type of string, round wound, flat, coating. It's fun to try new things. Go for it! Nashville tuning rocks! The easiest way of thinking about it is taking a String and remove the lower set of six and leave just the regular high strings with E, A, D, and G tuned an octave higher than usual.
This is of course not quite what the original poster was asking about, but it wasn't brought up yet. Personally I like. Sign up to join this community. The best answers are voted up and rise to the top. Stack Overflow for Teams — Collaborate and share knowledge with a private group. Create a free Team What is Teams? The guitar by itself is expensive enough, but because it comes along with other accessories, such as cables and amplifiers, the cost of everything all together is enough to empty your pockets.
The set-up of every location you take your electric guitar equipment with will be different, making it harder to find a suitable, consistent place to practice or perform every time.
The tones from an electric guitar are not as smooth and tender as those of an acoustic guitar. So, the player may spend more time adjusting the sound of the guitar to get a better feel for it.
For people who are looking to play a tune that revolves around music that is soft with a simplistic melody, an electric guitar should not be the first choice. Even though these disadvantages may seem minor, down the road, it can become a bit of a burden.
These are factors that need to be considered for those who are interested in playing electric guitars. After taking the time to thoroughly conduct the research on all aspects of an electric guitar, having all of the details will help determine whether an electric guitar is right for you or not. The numerous designs of electric guitars are one of the many reasons why it is one of the most popular instruments in the music industry.
Knowing the different types of electric guitars means knowing the different kinds of brands that there are. To have a better comprehension of the uniqueness behind some of these brands, we will provide a little insight into some of the best types of electric guitars.
One of the most popular electric guitar brands is Fender Musical Instruments Corporation, also known as Fender for short. Fender has produced some of the best designs for electric guitars since the s.
Each brand comes with a specific set of unique features that make it easy to manage playing these guitars.
Fender electric guitars are the best place to start looking at an electric guitar with an incredible design and a magnificent sound. Gibson guitars display an amazing tune with their designs being displayed with nothing short of creative craftsmanship.
The Gibson guitars are designed to give a crisp and strong sound that will keep the flow of the music going in a simplistic way. It is one of the highly recommended guitar brands to invest in for something with style and fluency in music. The Fender and Gibson guitar brands are at the top of the list of the best brands of guitars to own. However, there are other types that exist with the same purpose of playing a consistent tune of music with impressive and amazing designs as well.
Knowing the various electric guitars and their details will help provide a better insight to help you find the right guitar with the right tone and genre that will be suitable for you.
Just like with electric guitars, acoustic guitars have different models and styles as well. With each model comes a different style and tune. Looking at the various kinds can help determine which one would be suitable for you. To gather a better understanding of each type of acoustic guitar, here is a listof some of the different kinds of acoustic guitars:.
Each style comes with its unique features and qualities, providing a variety of different tones and designs. Being aware of the qualities that each guitar has will narrow down the choice of what would be best for you.
0コメント